GuidesInvoices and collection
IT consultant timesheets: how to collect them and get them approved
An IT consultant’s timesheet is collected without chasing when it arrives pre-filled, and only supports the invoice once the client has approved it.
Contents
- What is a timesheet in an IT consulting firm?
- What must a timesheet contain to support an invoice?
- Who signs the timesheet, and why does the client’s approval matter?
- What changes under portage salarial, subcontracting or a days-based arrangement?
- What does a late timesheet cost?
- How should timesheet collection be organised each month?
- Which timesheet software should you choose, and on what criteria?
- What can an AI employee take on, and what stays with people?
A consultant’s timesheet gets collected without chasing anyone when it arrives already filled in. The firm knows the month’s working days, the public holidays, the leave that has been booked and the days left on the purchase order, so all it needs to ask the consultant is to confirm or correct before the last working day. To support an invoice, the timesheet has to state, day by day and in half-days, what was worked on which assignment and under which order. It carries the consultant’s declaration and the client’s approval, and its total fits within what the contract provides.
This matters well beyond the comfort of the billing team. On a time-and-materials assignment, the timesheet is the only document that says which days were worked, and when a client does not pay, it is up to the firm to prove that the service was ordered and performed. The timesheet also sets the date of the invoice, and therefore the date of payment. Depending on how the contract counts its 45 days end of month, a timesheet two days late can push the cash back by a whole month.
French IT consulting firms call this document the compte rendu d’activité, or CRA, and this guide follows French rules. What follows is general information on French law as it stands on 13 November 2026, not legal advice. A specific contract, or a dispute heading for court, should be checked with a lawyer.
What is a timesheet in an IT consulting firm?
The timesheet is the monthly record of the days a consultant worked on an assignment, and it is the basis of time-and-materials billing. A time-and-materials assignment, which French firms call régie or assistance technique, is billed on time spent: the number of days in the month multiplied by the day rate set in the contract. The timesheet supplies the first half of that multiplication, and no other document in the file supplies it.
No general rule in France imposes a format on a consulting firm’s timesheet, but the invoice does have one. Article L441-9 of the French Commercial Code requires it to state the date of the service, the quantity and the unit price excluding VAT of the services provided. It must also carry the purchase order number when the buyer has issued one. On a time-and-materials assignment, the quantity is a number of days, and the timesheet is what establishes it. The same article requires the invoice to be issued as soon as the service has been performed, yet on such an assignment it cannot go out before the timesheet.
On a fixed-price project, the timesheet no longer drives the invoice, since the price is set in advance and paid in instalments. It drives the margin instead, because comparing the days actually spent with the days sold is how you find out whether the project earned what you expected. This guide deals with time and materials, where a day left off the timesheet is a day that will never be paid.
What must a timesheet contain to support an invoice?
A timesheet that supports an invoice lets someone who never followed the assignment find out who worked, for which client, on which days, under which order, and who confirmed it. It identifies the parties, the contract and the period. Then comes the detail of each day, with the reason for every day not billed, anything the contract bills separately such as on-call duty, and the total. It ends with the consultant’s declaration and the client’s approval.
Monthly timesheet template
Timesheet · November 2026
Firm: [company name, SIREN] Client: [company name]
Consultant: [first name, surname] Assignment: [title, reference]
Contract: [reference] Purchase order: [no.], 60 days from 1 October to 31 December 2026
Working days in the month 20
Public holiday 11 November
Days not billed 27 November (paid leave)
13 November afternoon (internal training)
Billable days 18.5
On-call duty, days outside working time none
Day-by-day detail [one line per day: 1, 0.5 or 0, and the reason]
Used on the purchase order 42 days of 60 (23.5 before this month)
Declared by the consultant [name, date]
Approved for the client [name, role, date]
Two lines in this template prevent most of the back and forth. The purchase order number matters because it has to appear on the invoice, and the client’s accounts team matches every invoice to its order before paying it. The reason for each day not billed matters just as much: an unexplained zero on the 27th prompts a question, whereas a zero marked “paid leave” prompts none.
The template counts in days and half-days. If the contract bills by the hour, the detail moves to hours and nothing else changes.
Who signs the timesheet, and why does the client’s approval matter?
Three people are involved in a timesheet, and each of them vouches for something different. The consultant declares what they did, because they are the only one who knows. The firm, through its account manager or billing team, checks that the declaration matches what it already knows: the schedule, the absences, the order. The client then confirms that those days match what it saw, through the manager who saw the work rather than through its procurement team.
The client’s approval is the document that matters most on the day an invoice goes unpaid. Under article 1353 of the French Civil Code, whoever claims performance of an obligation must prove it. The Cour de cassation applied this to an IT services contract on 10 March 2021 (no. 19-14.888): it was for the supplier “to prove that the services in dispute had been ordered and performed”. The appeal court had been satisfied with detailed invoices and with the client’s failure to prove the contrary, and its ruling was overturned on that point. A timesheet approved every month by the client’s manager keeps you out of that position.
The form of the approval matters less than the record it leaves. Between traders in France, commercial acts can be proved by any means (article L110-3 of the French Commercial Code). A scanned signature, an electronic signature, an approval email or a click recorded in software are all worth something, provided you can say, a year later, who approved which month and on what date.
That leaves the client who does not answer. Silence is not acceptance unless the law, custom, an ongoing business relationship or particular circumstances say otherwise (article 1120 of the French Civil Code), so a timesheet left unanswered has not been approved. The contract can deal with this by stating that a timesheet not disputed within a few working days counts as approved. That clause is far easier to negotiate at signature than in the first month it would have unblocked.
Approval also puts any disagreement at the right moment. A day disputed on a timesheet is settled in one conversation at the end of the month, between two people who still remember the week in question. The same day disputed on an unpaid invoice, two months later, blocks the whole amount, and an unpaid invoice that stems from a dispute is not chased, it is settled first. When a single day is in question, billing the days nobody disputes and handling the rest separately keeps a whole month from freezing over one day.
What changes under portage salarial, subcontracting or a days-based arrangement?
The principle is the same whatever the consultant’s status, but three situations add a written rule to the timesheet, coming from a collective agreement or from the Labour Code.
Under portage salarial, the timesheet is a collective-agreement obligation
Portage salarial is the French arrangement in which an independent consultant is employed by a portage company that invoices the client on their behalf. The sector’s collective agreement of 22 March 2017 requires the consultant to give a faithful written account of their activity at least once a month (article 20). That report, approved by the portage company, includes the dates of the days and half-days worked, or the hours when working time is counted in hours. The portage company then checks what it receives “on the basis of an activity report countersigned, where applicable, by the client” (article 18.1).
The consequence is more direct than in a consulting firm, because the timesheet also drives the payslip. The amount available to the consultant is calculated on the price of the service as collected by the portage company, and their pay on the days or hours declared in the report (article 21.2). A late timesheet delays the invoice, and the invoice delays what the consultant receives.
Under subcontracting, two invoices depend on the same timesheet
When the firm places a freelancer or a portage consultant with its client, the timesheet approved by the client supports two invoices: the firm’s invoice to its client, and the one the subcontractor sends the firm. You then have to check that both carry the same number of days, since any gap comes out of the firm’s margin and nowhere else.
The arrival of the timesheet is also a good moment for a check the law requires of the contracting party. For a contract of at least €5,000 excluding VAT, the firm must obtain from its subcontractor an URSSAF compliance certificate, the attestation de vigilance, at signature and then every six months until the contract ends (article D8222-5 of the French Labour Code). We cover that deadline in our piece on getting listed with a large account, and looking at the certificate’s date whenever a timesheet comes in is enough to keep it from ever lapsing.
On a days-based arrangement, the timesheet counts the same days as the legal record
For an employee on an annual days-based arrangement, the forfait jours, working time is counted each year by adding up the number of days or half-days worked (article D3171-10 of the French Labour Code). The Syntec collective agreement, the sector agreement for engineering and consulting firms, adds that the employer keeps a document showing the number and dates of the days worked and how each day not worked is classified. The employee fills it in under the employer’s supervision (article 4.7 of the agreement of 22 June 1999 on working time).
The timesheet sent to the client and that record are not the same document, and nothing requires them to be merged. They do count the same days, though, and a timesheet that bills the client for a day the internal record classes as rest creates a problem on both sides at once. The safest course is for both to come from the same entry.
What does a late timesheet cost?
A late timesheet pushes back the cash, lets through days that will never be billed, and reveals at invoice time that an order had run out. To put orders of magnitude on it, take a consulting firm with thirty consultants on time and materials, using our own assumptions, which you should replace with yours. At an average day rate of €520 and twenty billed days a month, each consultant represents €10,400 excluding VAT a month, and the firm €312,000.
Cash that arrives later
Unless agreed otherwise, the payment term between businesses in France is thirty days after the service is performed. A contract can agree a different term, and article L441-10 of the French Commercial Code then caps it at sixty days from the date the invoice is issued, or at 45 days end of month. As soon as the due date runs from the invoice date, every day the timesheet is late becomes a day the payment is late.
The 45 days end of month term holds an unpleasant surprise. Service Public Entreprendre, the French government’s official site for businesses, describes two ways of calculating it, and client and supplier have to agree on one. The first takes the end of the month of issue and adds 45 days, while the second adds 45 days to the invoice date and goes to the end of that month. Either way, the due date moves in steps of a month. With the first method, for a firm that invoices on the last day of the month, an invoice dated 30 November 2026 is due on 14 January 2027, and the same invoice dated 2 December is not due until 14 February. With the second, a November invoice issued on 4 December is due on 31 January, but the same invoice issued on 18 December, after two weeks of chasing, is not due until 28 February. In our example, four invoices that cross that step push €41,600 excluding VAT back by a whole month.
That delay comes on top of the client’s own lateness, which is out of your hands. According to the 2025 report of the Observatoire des délais de paiement, the French payment delays observatory, the average payment delay in France stood at 13.4 days at the end of 2025. It reached 20.9 days for companies with 1,000 or more employees, on Altares data quoted in the report, and fewer than half of large companies pay their suppliers within the legal limit of sixty days. The client’s lateness is negotiated and chased, whereas the timesheet’s delay can be removed altogether, since it sits entirely with you.
Days that will never be billed
A timesheet filled in from memory on the 5th of the following month forgets whatever was out of the ordinary: the half-day of a Saturday release, a weekend on call, the day spent helping another of the client’s teams. That day’s salary is paid regardless, so the €520 forgotten comes straight off the margin. With the daily cost of €340 we used to work out a consultant’s day rate, one forgotten day wipes out the margin of nearly three billed days. It is the least visible of the three losses, and the only one that is permanent.
The opposite mistake costs something else. A day billed while the consultant was on leave, spotted by the client’s manager, is corrected with a credit note and paid for in trust, which is harder to win back than a missing day.
The order that turns out to be used up at invoice time
A purchase order covers a number of days over a period, and a timesheet that is checked against nothing will not show that the consultant is about to go beyond it. The extra days land on an invoice that no longer matches any commitment from the client, and they wait while a further order is obtained. Tracking the days left every month lets you ask for the renewal before the order runs out. It is also the moment to reopen the price, as we showed when looking at the margin that is lost at renewal.
How should timesheet collection be organised each month?
Timesheet collection is organised around a date set before the end of the month. The firm sends each consultant a timesheet already filled in with what it knows, checks it before it goes to the client, then asks the client to approve it by a stated date. The schedule we recommend has six steps, counted in working days around the end of the month.
| When | Who | What happens |
|---|---|---|
| Three working days before the month ends | the firm | the timesheet is pre-filled from the schedule and sent to each consultant |
| Last working day of the month | the consultant | confirms or corrects, then approves |
| First working day of the next month | the firm | checks against the order, the schedule and the calendar |
| Second working day | the firm, then the client | sends it to the client’s manager with an approval date |
| Fourth working day | the firm | chases an approver who has not answered, then calls |
| Once approved | the firm | issues the invoice with the approved timesheet attached |
Pre-fill instead of asking
Timesheets arrive late because consultants are asked to rebuild a month from memory, when the firm already knows almost everything in them. Working days, public holidays, booked leave, planned training and the current assignment are all in its tools. What only the consultant can say is what departed from the plan. A message that shows them the month as the firm knows it gets dealt with between two meetings, whereas a blank form waits for the end of the week.
Hello Karim, for November the schedule shows 20 working days on the Altea assignment, your leave on the 27th and the internal training on the afternoon of the 13th, which makes 18.5 billable days. If that is right, please approve your timesheet before Monday the 30th; if not, tell me what changed, a weekend on call or an extra day for instance.
The reminder that follows, if one is needed, works best when it is as precise as the first message. “Your November timesheet is missing” reads as noise in the middle of a busy day. A reminder that says “your confirmation is missing, and your draft bills the 27th although the schedule has you on leave that day” gets an answer.
Check before it goes to the client
The firm’s check comes down to four comparisons, in this order. The billable days are compared first with the days left on the purchase order, to see the end of the order coming. The timesheet is then compared with the schedule and the recorded absences, so that no day of leave gets billed. The calendar comes next, since a public holiday or a Saturday can only be billed if the contract allows it. The month is finally compared with previous months and with the assignment’s end date, to catch a total that looks like nothing the assignment has produced so far.
Get the client’s approval by a stated date
The approval request goes to the operational manager, with the date by which an answer is expected and an open door for corrections. It leaves the company, so a person reads it before it goes.
Subject: November 2026 timesheet, [consultant], assignment [reference]
Hello [first name],
Please find [consultant]’s timesheet for November: 18.5 days on the [title] assignment, purchase order no. [number]. Could you approve it by [date]? If any day does not match what you saw, let us know and we will correct it before we issue the invoice.
Kind regards, [first name, surname, role]
The invoice goes out as soon as the timesheet is approved, with the purchase order number and the approved timesheet attached. Nothing requires the attachment, but the person matching the invoice to the order at the client’s end then has in front of them the days their own manager approved.
Which timesheet software should you choose, and on what criteria?
Timesheet software is best chosen on what happens between the consultant’s entry and the invoice, rather than on its feature list. Three kinds of tool coexist in consulting firms: the spreadsheet, the portal the client imposes, and the timesheet module of a consulting firm’s ERP.
A spreadsheet is enough for a handful of consultants, but it keeps no record of who changed what and leaves all the checking to be done by hand. BoondManager notes that the Excel timesheet consultants have to fill in, print, get signed, scan and send back is still common practice in many French IT consulting firms. The client’s portal, which some large accounts impose, makes the consultant enter the same days twice, because the firm still needs its own record, both to invoice and for the forfait jours count. The timesheet module of a consulting firm’s ERP, finally, links the entry to the order and to the invoice.
The criteria that matter can be checked in a demo, on a real month from your own firm rather than on the vendor’s example.
| Criterion | What to check |
|---|---|
| Entry | the consultant approves from their phone a timesheet already pre-filled with absences and holidays |
| Client approval | a link that needs no account, the option to chase, a dated record of who approved |
| Checking | days compared with the order, the schedule and the calendar before the invoice |
| Invoice | generated from the approved days, timesheet attached, in electronic format |
| Record | an exportable history of who declared, corrected and approved, and when |
BoondManager, the consulting firm ERP that Balt connects to, shows how these criteria translate into a tool. Its validation workflows are strictly internal, since only managers who exist in the tool can be part of them. Client approval works by sending the timesheet for signature through a unique link that needs no login or password, and the approver can be sent a reminder. On the billing side, the vendor describes a view of every timesheet’s status before the month’s invoices are generated in a batch, and the option to attach approved timesheets to invoices.
The invoice criterion now has a date. A small or medium-sized business in France will have to issue its invoices electronically, through an approved platform, from 1 September 2027, as our definition of e-invoicing explains. Whatever tool produces the invoice for a time-and-materials assignment will have to be able to do so.
What can an AI employee take on, and what stays with people?
An AI employee can prepare the reminders, check each timesheet against the order and the schedule, and prepare the invoice, while the declaration, the approval and any disagreement stay with people. A plain alert saying a timesheet has not been submitted is an automation, and we filed it among the pipes that ought to stay boring when we explained what separates an agent from an automation. What an agent adds is reading: comparing each timesheet with the assignment, the schedule and the calendar, then telling each person what is missing or what does not add up.
Balt, the AI employee for small businesses, does that work in the tools the firm has opened to it. It reads timesheets, assignments and consultants in BoondManager and prepares, on the agreed date, each consultant’s summary of the month. It flags a day billed on a public holiday, an order that will run out next month, or an absence on the schedule that does not appear on the timesheet. Once timesheets are approved, it prepares the invoices in Pennylane with the days, the assignment’s day rate and the purchase order number. This work comes round every month as a routine, and the follow-up of incoming payments carries on in Qonto, as shown on the cash collection page.
Approval follows the line we apply everywhere. A reminder to a consultant employed by the firm stays inside the company, whereas a reminder to the client’s manager or to a subcontracted freelancer leaves it, as the invoice does, and each of those waits for your go-ahead before it goes. Balt does not get the client to approve any faster than a person would: what it changes is that nobody has to remember to chase, or to check.
The declaration, for its part, stays the consultant’s. Balt never confirms a timesheet on a consultant’s behalf, because a timesheet confirmed by someone other than the person who did the work is no longer a declaration. Approval stays with the client, and a disputed day stays a conversation between the account manager and the client’s manager, as does the decision to bill beyond the order or to issue a credit note.
Once the invoice is out, the next question is getting it paid. The reminder schedule, the penalties and the letter templates are in our guide to chasing an unpaid invoice, and what else Balt does for an IT consulting firm, from bench time to sourcing, is on the page dedicated to them.
Frequently asked questions
Is a timesheet legally required to bill a time-and-materials assignment in France?
No general rule imposes one on an IT consulting firm: in practice it is the services contract that makes the timesheet the basis of the invoice. Without it, though, the firm has to prove the days some other way if the client does not pay, since whoever claims performance of an obligation must prove it (article 1353 of the French Civil Code). For consultants employed through a portage salarial company, the sector’s collective agreement requires a written activity report at least once a month.
What if the client does not approve the timesheet?
Unless a clause says that a timesheet not disputed within a set period counts as approved, the client’s silence is not acceptance (article 1120 of the French Civil Code). You chase the manager who approves it, then call them, and write that clause into the next contract. If the client disputes a specific day, billing the days nobody disputes and handling the rest separately keeps the whole month from being blocked.
Should the timesheet be attached to the invoice?
The law does not require it: article L441-9 of the French Commercial Code lists what an invoice must state, including the quantity, the unit price and the purchase order number, and says nothing about the timesheet. Attaching it is still the best way to keep the invoice from waiting at the client’s end, because the person matching it to the order can see the days their own manager approved.
Can a timesheet be approved electronically?
Yes. Between traders in France, commercial acts can be proved by any means (article L110-3 of the French Commercial Code), so an electronic signature, an approval email or a click recorded in software is evidence just as a scanned signature is. What matters is being able to say, months later, who approved which month and on what date.
Should a timesheet be kept in days or in hours?
It follows the billing unit set in the contract, days and half-days or hours. The collective agreement for portage salarial covers both cases, with the dates of the days and half-days worked or, when working time is counted in hours, the hours of the assignment.
Sources
- Légifrance, Cour de cassation, commercial chamber, 10 March 2021, no. 19-14.888 (proof that services were ordered and performed, in French)legifrance.gouv.fr
- Légifrance, French Civil Code, article 1353 (burden of proof, in French)legifrance.gouv.fr
- Légifrance, French Civil Code, article 1120 (silence and acceptance, in French)legifrance.gouv.fr
- Légifrance, French Commercial Code, article L110-3 (proof between traders, in French)legifrance.gouv.fr
- Légifrance, French Commercial Code, article L441-9 (invoicing and what an invoice must state, in French)legifrance.gouv.fr
- Légifrance, French Commercial Code, article L441-10 (payment terms, in French)legifrance.gouv.fr
- Service Public Entreprendre, Payment terms between businesses and late-payment penalties (checked 7 August 2026, in French)entreprendre.service-public.gouv.fr
- Observatoire des délais de paiement, 2025 annual report (September 2026), table T2 of late payment by company size, Altares data (in French)acpr.banque-france.fr
- Banque de France, The 2025 annual report of the Observatoire des délais de paiement (24 September 2026, in French)banque-france.fr
- Légifrance, collective agreement for employees in portage salarial of 22 March 2017, articles 18.1, 20 and 21.2 (in French)legifrance.gouv.fr
- Légifrance, French Labour Code, article D3171-10 (counting the days of employees on a days-based arrangement, in French)legifrance.gouv.fr
- Légifrance, Syntec collective agreement, agreement of 22 June 1999 on working time, article 4.7 (record of days worked, in French)legifrance.gouv.fr
- Légifrance, French Labour Code, article D8222-5 (URSSAF compliance certificate, in French)legifrance.gouv.fr
- BoondManager, Timesheet signature by the client (help centre, 23 February 2026)help.boondmanager.com
- BoondManager, Managing the validation workflows for my resources (help centre)help.boondmanager.com
- BoondManager, Finance solution for IT services and consulting companies: timesheet checks before invoicing and invoice appendicesboondmanager.com
- BoondManager, 5 good practices to optimise timesheet collection in IT consulting firms (in French)boondmanager.com
- Entreprendre Service Public, E-invoicing has been in force since 1 September 2026 (2 September 2026, in French)entreprendre.service-public.gouv.fr

