BlogCraft
Setting an IT consultant’s day rate, and negotiating it
An IT consultant’s day rate is built from daily cost and a target margin, checked against the 2026 market, and negotiated with a floor written down beforehand.
Contents
- How do you calculate a consultant’s daily cost?
- What margin should you aim for, and how does it become a day rate?
- What day rates does the market accept in 2026, by profile?
- How do you negotiate the day rate with the client’s procurement team?
- Should you go below the target margin when the consultant is on the bench?
- How do you prepare the renewal increase at signature?
- What can an agent prepare, and what stays with the account manager?
An IT consultant’s day rate is set by starting from what the consultant costs, not from what the market pays: full annual cost, divided by the days the consultant will actually bill, then divided by one minus the margin you are aiming for. The market comes in afterwards, to check that the price holds against what the buyer has in mind, and the negotiation is prepared with a floor written down before the meeting rather than discovered during it.
The order matters because the reverse order is the common one. You look at what competitors or freelancers charge for a similar profile, pitch slightly below to win, and find out at year end that the engagement made less than planned, or nothing at all. Starting from cost does not guarantee a higher price; it guarantees that, at signature, you know what you are agreeing to give up.
How do you calculate a consultant’s daily cost?
By dividing the full annual cost by the number of days the consultant will really bill, not by the number of working days in the year. The divisor, far more than the salary, is what skews most calculations.
Take the example we used for the margin that is lost at renewal, built on our assumptions, which you should replace with yours. A consultant paid €48,000 gross a year, with an employer cost multiplier of 1.45, costs the company about €69,600 a year. Divided by 205 billed days, that gives a daily cost of about €340. Divide instead by 218 days, roughly what is left of a French year once weekends, public holidays, paid leave and RTT days are taken out, and you get €319, and the whole rate card built on it is wrong by twenty euros a day.
The days missing between the two are not an abstraction. There is training, there is absence, and above all there is bench time, whose average rate is 11.4% with an average length of 41 days. We have set out what bench time really costs, and it enters here through the side door: every day without an engagement is paid for by the billed days, and a day rate that ignores it assumes a consultant who is always staffed, which no consulting firm has ever seen.
One distinction tends to get flattened in spreadsheets. The consultant’s direct cost, salary and employer contributions, does not include the account manager who placed them, management, premises or tools. Those overheads are not calculated consultant by consultant, but they are paid out of each consultant’s gross margin, which is why the target margin cannot drop as low as one would like when an engagement is contested.
What margin should you aim for, and how does it become a day rate?
Margin is calculated on price, not on cost, and that changes the result more than people expect: the day rate is cost divided by one minus the margin, not cost multiplied by one plus the margin. With a cost of €340, aiming for a 35% margin gives €523, whereas adding 35% to the cost only gives €459, an actual margin of about 26%.
To set the target, Cobalt’s guide to running an IT consulting firm profitably puts the target gross margin between 25% and 35%, and treats anything below 20% as structurally fragile. Those bounds give a usable grid for our consultant at €340 a day:
| Target gross margin | Matching day rate | Margin per day |
|---|---|---|
| 20% (floor) | €425 | €85 |
| 25% | €453 | €113 |
| 30% | €486 | €146 |
| 35% (upper target) | €523 | €183 |
The table is more useful than it looks, because it turns a discussion of impressions into a discussion of figures. An account manager who knows that at €453 the engagement still leaves €113 a day can go down that far without asking anyone, and also knows that below €425 the decision has to go up a level. The grid does not set the price for them; it tells them where the zone begins in which they are no longer deciding alone.
What day rates does the market accept in 2026, by profile?
The benchmark the buyer has in mind is often a freelancer’s rate, because it is the only one that gets published. Hays’s 2026 salary survey, based on more than 2,500 professionals, gives the following day rates for Paris, excluding VAT:
| Freelance profile, Paris | 0 to 3 years | 3 to 5 years | 5 to 8 years | Over 8 years |
|---|---|---|---|---|
| Full-stack developer | €450 | €515 | €580 | €650 |
| Data engineer | €480 | €590 | €660 | €700 |
| SecOps | €530 | €600 | €635 | €750 |
| Cloud architect | €580 | €620 | €700 | €780 |
| Project manager | €600 | €680 | €730 | €800 |
Outside the Paris region, the same survey finds gaps of 5% to 10% depending on the job family, with software development the most discounted at about 10% below Paris.
The comparison is uncomfortable, which is exactly why you should make it before the buyer does. If our consultant at €340 a day is a full-stack developer with four years of experience, the rate that gives a 35% margin, €523, is already above the Paris rate of a freelancer with the same seniority. The gap is not illegitimate: the client is also buying continuity if the consultant leaves, a guaranteed replacement, the liability of a company and a single invoice. But it has to be sayable in one sentence, or the buyer will read it as margin and negotiate it as such.
That is also where the skills dossier bears on price. A consultant presented as a list of technologies gets compared with a grid; a consultant presented through what they delivered on a system close to the client’s gets compared with a project risk, and a risk is paid for more willingly than a line on a grid.
How do you negotiate the day rate with the client’s procurement team?
By arriving with three figures already written down: the target price, the floor below which the engagement costs more than it brings in, and the trade you will ask for every euro conceded. A negotiation in which the floor is discovered at the table almost always ends at the floor.
The balance of power is not favourable right now, and admitting it avoids misreading it. In the Grand Angle ESN & ICT survey published by Numeum and KPMG in October 2025, covering around two hundred firms, 85% of respondents named economic tension and weak demand as their main risk factors. Buyers know it, and their per-profile rate grids, the ones filled in when getting listed with a large account, are designed to compare suppliers on a single column.
The same survey finds, though, that IT departments are looking for trusted partners rather than mere suppliers, and that is the opening a consulting firm has. The buyer negotiates a price; the line manager who asked for the consultant wants the project to move. A discussion held only with procurement is played on the grid, whereas a discussion prepared with the manager reaches the buyer with a need already qualified and a profile already wanted.
Then there is the rule that protects margin the most: a price concession is traded, never given. A twenty-euro cut in exchange for a twelve-month commitment instead of three, for thirty-day payment instead of sixty, for a second consultant on the same project, is a commercial trade-off. The same cut handed over to close the discussion becomes the new price, and it will be the basis of every renewal.
Should you go below the target margin when the consultant is on the bench?
Sometimes, and that is the real concession in this method. A consultant on the bench costs on average €250 per working day while bringing in nothing, so the relevant threshold is no longer the target margin but the cost of waiting: an engagement at €425 is worth more than another month on the bench, and turning it down in the name of a grid would be a mistake nobody would ever spot on a dashboard.
The danger lies elsewhere. An engagement signed in a hurry at a tight price is not a short engagement: it will be renewed, often for years, and every renewal will start from the original price. The rate accepted in March to get someone off the bench becomes the rate of a long engagement by December, without anyone ever having chosen it as such. If you agree to go lower, write it down, set the date on which the price will be reviewed, and tell the client at signature.
How do you prepare the renewal increase at signature?
By writing the revision clause, its frequency and the date on which it will be invoked into the contract, and then naming the person who will do it. The starting day rate is not a price for the engagement; it is the starting point of all its future prices.
Indexation will not do that work on its own this year. The revised Syntec index stood at 320.4 in August 2026 against 321.1 a year earlier, while the median pay rise in France reached 3% according to WTW. A clause applied to the letter would therefore have raised nothing, and the consultant you gave a raise to keep costs more every year. We quantified that drift and described the renegotiation sequence in the article on margin lost at renewal; what belongs to setting the price is laying down its conditions before the engagement starts.
In practice this comes down to three lines in the contract or purchase order: an annual revision possible above the index, a discussion date placed before the next purchase order is issued, and a starting rate that leaves a few points of margin above the floor. Those few points are what will absorb a pay rise without reopening the contract in a rush.
What can an agent prepare, and what stays with the account manager?
The calculation can be delegated entirely, the price not at all. An agent with access to payroll and engagement tracking can recalculate each consultant’s daily cost as soon as a salary changes, keep the margin grid and the floor per profile up to date, and prepare for each tender a costed proposal with market benchmarks and the client’s history.
The proposal itself leaves the company and commits it to a price, which puts it among the messages a person reviews and releases, following the line we apply to everything that goes out. The negotiation stays with the account manager, because it is held with someone they will see again at every renewal. That is the split we chose for Balt: the figure arrives before the meeting, the decision stays with the person who signs.
The next question concerns the client who does not negotiate because nobody calls them any more. The oldest accounts are often the ones whose day rate has not moved since signature, and the repeat clients left without news are where that original price costs the longest.
Frequently asked questions
How do you calculate a consultant’s minimum day rate?
Start from the annual gross salary, multiply by the employer cost multiplier, and divide by the number of days the consultant will actually bill in the year, net of bench time and training. That gives the daily cost; the minimum day rate is that cost divided by one minus the lowest gross margin you accept, for instance €340 divided by 0.8 for a 20% margin, which is €425.
What gross margin should a time-and-materials consultant carry?
Common benchmarks put the target gross margin of an IT consulting firm between 25% and 35%, and treat anything below 20% as structurally fragile. The right figure depends on your overheads: the gross margin has to pay for sales, management and premises before any profit is left.
Should you lower your day rate to win an engagement?
Sometimes, if the consultant is on the bench and the cut is traded for something: a longer commitment, more volume, shorter payment terms. A cut given away for nothing becomes the reference price for every later renewal, and that is what costs the most over time.
Can a consulting firm’s day rate be higher than a freelancer’s?
Yes, and it often is, but it has to be justified by what the client does not get from an independent: continuity if someone leaves, guaranteed replacement, the contractual liability of a company. A gap the firm cannot explain will be read by the buyer as margin, and negotiated as such.
Sources
- Blog du Modérateur, Freelance dans la tech : les taux journaliers moyens par métier en 2026 (Hays salary survey, January 2026)blogdumoderateur.com
- Numeum and KPMG, Grand Angle ESN & ICT 2025, press release (October 2025)numeum.fr
- Juristique.org, Indice Syntec d’août 2026 : calculs, évolution et analyse (September 2026)juristique.org
- Culture RH, 2026 : l’année de l’individualisation des augmentations ? (August 2026, WTW Salary Budget Planning survey)culture-rh.com
- Cobalt, Guide complet de gestion d’une ESN en 2025 : stratégie, rentabilité et outilscobalt-ia.com

